教授 博士生导师
招生学科专业:
机械工程 -- 【招收博士、硕士研究生】 -- 机电学院
航空宇航科学与技术 -- 【招收硕士研究生】 -- 机电学院
机械 -- 【招收博士、硕士研究生】 -- 机电学院
性别:男
毕业院校:南京航空航天大学
学历:博士毕业
学位:工学博士学位
所在单位:机电学院
联系方式:meeghjin@nuaa.edu.cn
电子邮箱:
最后更新时间:..
点击次数:
所属单位:机电学院
发表刊物:Trans. Nanjing Univ. Aero. Astro.
摘要:The tooth surface friction stiffness and friction torque coefficient equations of cylindrical gear are derived. On the basis of factors such as time-varying friction coefficient and mesh stiffness, support stiffness, torsional stiffness and comprehensive error, the dynamic equations of the gear trains with bending-torsional coupling are established. Using the Fourier series method, the total response of the system is obtained, and the influence of friction on it is analyzed. The results show that when the spur gear enters the meshing, the frictional amplitude of the tooth surface is larger than that of the gear when it is withdrawn from engagement, and the meshing force fluctuates greatly. The frictional force and dynamic meshing force of the herringbone gear tooth surface are relatively stable, and the fluctuation amplitude is much smaller than that of the spur gear. The amplitude of the bearing vibration is not affected by the friction, but the friction has a certain influence on the bearing force of the output shaft. The first-order natural frequency of the split stage and the power confluence stage has a large influence on the vibration of the bearing force. In general, the natural frequency of the power confluence stage has a large proportion of influence. © 2019, Editorial Department of Transactions of NUAA. All right reserved.
ISSN号:1005-1120
是否译文:否
发表时间:2019-06-01
合写作者:Yang, Haoyun,陆凤霞,朱如鹏
通讯作者:靳广虎