点击次数：

所属单位：机电学院

发表刊物：JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES

关键字：Split torque Dynamic response Load sharing Sensitivity Coupling system

摘要：The split-path transmission, particularly attractive alternatives to the traditional epicyclic gear transmission of the helicopter, provides two parallel pathways for transmitting torque from the engine to the rotor. The key technical index of the split path design is to equalize the torque in each path as much as possible. Therefore, it is necessary to study the sensitive design parameters affecting load sharing characteristics. In order to obtain the utmost sensitive parameters and the change law of the effects, a coupled dynamic analysis model considering the time-varying meshing stiffness, mesh errors and mesh damping, is established for the split torque transmission system. Taking support stiffness and torsional stiffness as variables, the sensitivities of load sharing coefficient to these parameters are calculated and analyzed based on sensitive analysis, and the distribution law of the sensitivities of load sharing coefficient is obtained. Results show that load sharing coefficient has a higher sensitivity to the torsional stiffness and the support stiffness of duplicated gear shafts, but lower to input shafts and output shaft. Furthermore, reducing torsional stiffness or increasing two lateral support stiffness of duplicated gear shaft will yield the same results and are contributive to the improvement of load sharing.

ISSN号：2321-3558

是否译文：否

发表时间：2017-12-01

合写作者：Xiong, Y. P.,桂永蕃,朱如鹏

通讯作者：靳广虎