Affiliation of Author(s):材料科学与技术学院
Journal:Vacuum
Abstract:Six series of cermet samples with Cr contents between 0 and 12.5 wt.% in 2.5 wt.% increments were prepared by vacuum sintering. The transverse rupture strength (TRS), hardness (HRA) and fracture toughness (K1C) were also measured. It was discovered that the grain size was affected by the Cr content. As the Cr addition increased, the average grain size and aspect ratio of the Mo2FeB2hard phase decreased, while the lattice constant ratio c/a increased. Consequently, the particle morphology gradually transformed from elongated to nearly equiaxed. The transverse rupture strength and hardness of the cermets firstly increased and following decreased slightly as the Cr content increased, while the fracture toughness gradually decreased. The cermets with 10 wt.% of Cr addition exhibited the lowest grain size. The cermets with 10 wt.% of Cr addition demonstrated the TRS, hardness and fracture toughness values of 2124.1 MPa, 89.0HRA and 23.8 MPa m1/2, respectively. © 2018 Elsevier Ltd
ISSN No.:0042-207X
Translation or Not:no
Date of Publication:2018-09-01
Co-author:Zhang, Jiajie,L00189,Zhang, Guotao,Ke, Zheng,dzw,Feng, Ping
Correspondence Author:zy
Date of Publication:2018-09-01