Affiliation of Author(s):自动化学院
Journal:Hangkong Xuebao
Abstract:Dual-buck inverter (DBI) is one of the widely adopted topologies in aeronautical static inverters (ASIs). With discrete AC filter inductor, the volume and weight of dual buck-half bridge inverters (DBHBIs) are further reduced. However, there will be voltage ripple on input capacitors when a dual-buck half bridge inverter is normally operated, especially when the load is shorted, and the ripple is at the same frequency as the output voltage. In this paper, a DBHBI with discrete AC filter inductor is taken as an example, which operates on the conditions of nominal load, short circuit and cascade. The cause for voltage ripple on input capacitors is analyzed, and the mathematical calculation method and the guidelines for capacitor design is proposed. The analysis is verified by the results of simulations and experiments. The method in this paper can be also applied to other half bridge inverters. © 2017, Press of Chinese Journal of Aeronautics. All right reserved.
ISSN No.:1000-6893
Translation or Not:no
Date of Publication:2017-01-25
Co-author:Meng, Wuji,Xie, Jianghua,Wang, Jinlong
Correspondence Author:Meng, Wuji,zfh
Professor
Supervisor of Doctorate Candidates
Gender:Male
Alma Mater:南京航空航天大学
Education Level:南京航空航天大学
Degree:Doctoral Degree in Engineering
School/Department:College of Automation Engineering
Discipline:Power Electronics and Transmission
Open time:..
The Last Update Time:..