点击次数：

DOI码：10.1007/s00170-020-06414-3

所属单位：南京航空航天大学

教研室：航空学院-精密驱动与控制研究所

发表刊物：International journal of advanced manufacturing technology

关键字：Aerospace industry CAE) and Design Computer-Aided Engineering (CAD Engineering Fine blanking Finite element method Gaskets Industrial and Production Engineering Machining Mathematical models Mechanical Engineering Mechanical properties Media Management Numerical methods Original Article Piezoelectric ceramics Stalling Stators Torque Ultrasonic testing

摘要：Ultrasonic motor acts as a significant equipment which has been widely used in automobile, aerospace, and medical industry. As the core part of the ultrasonic motor, a novel separable stator fabricated by the fine-blanking process is proposed, and the validity and rationality as well as the operation performance of the novel stator are investigated. A finite element model is used to check the feasibility of the stator. The model of the stator contains teeth body, piezoelectric ceramic ring, inner and outer gaskets, and adhesive and welding layer. Based on the model, simulations are carried out to obtain mechanical characteristics. The inner, outer gasket and teeth body of the stator are welded together. This manufacturing process cost can be significantly reduced compared to the machining process for the conventional stator. The stator prototype is also fabricated and assembled. The maximum rotary speed and stalling torque are tested by torque speed sensor. The experimental results show that maximum rotary speed can reach to 150 r/min, and maximum stalling torque is 1.42 Nm, which shows the fine-working performance and the rationality of the stator structure. The research confirms that the separable stator fabricated by fine-blanking process has promising future in the ultrasonic motor application area.;Ultrasonic motor acts as a significant equipment which has been widely used in automobile, aerospace, and medical industry. As the core part of the ultrasonic motor, a novel separable stator fabricated by the fine-blanking process is proposed, and the validity and rationality as well as the operation performance of the novel stator are investigated. A finite element model is used to check the feasibility of the stator. The model of the stator contains teeth body, piezoelectric ceramic ring, inner and outer gaskets, and adhesive and welding layer. Based on the model, simulations are carried out to obtain mechanical characteristics. The inner, outer gasket and teeth body of the stator are welded together. This manufacturing process cost can be significantly reduced compared to the machining process for the conventional stator. The stator prototype is also fabricated and assembled. The maximum rotary speed and stalling torque are tested by torque speed sensor. The experimental results show that maximum rotary speed can reach to 150 r/min, and maximum stalling torque is 1.42 Nm, which shows the fine-working performance and the rationality of the stator structure. The research confirms that the separable stator fabricated by fine-blanking process has promising future in the ultrasonic motor application area.;

论文类型：期刊论文

学科门类：工学

文献类型：J

卷号：112

期号：9-10

页面范围：2435-2445

是否译文：否

发表时间：2021-01-01

收录刊物：EI、SCI、SCIE

合写作者：Xiong, Yue,Hua, Lin,Yang, Lin,Zeng, Weijun