![]()
鲁世红
-
教授
博士生导师
- 性别：女
- 毕业院校：南京航空航天大学
- 学历：南京航空航天大学
- 学位：工学博士学位
- 所在单位：机电学院
- 办公地点：15-407
- 联系方式：13951807635，lush@nuaa.edu.cn
- 电子邮箱：6e6e7430f4d7f74b70bb11b48f6e9dea3ce39405fe3b21be38df0a43970d5deeac0def904333ed6c3975f3c55db738da85b3122468dbe5f0582648b075164d4c1590528fd017c40042e68d5d1824ad16b9fe21cfacc0b8b0abc67d69f99787c5e4a82dbba743b020c5d4f370b7b92e66bbba7f5fdc7a169389bcfaa49799c96e
访问量：
-
[1] 鲁世红,鲁世红,Zhang, Jiabin.Microstructure Evolution and Dynamic Recrystallized Model of 5083 Aluminum Alloy during Hot Deformat:Proc. Int. Conf. Mech. Aerosp. Eng., ICMAE,2018
-
[2] 鲁世红,鲁世红,毛志翔,李正芳,张春,向琳彤.电加热渐进成形工艺参数优化及成形温度预测:热加工工艺,2019
-
[3] 鲁世红,鲁世红,Li, Zhengfang,Yang, Wenkai,F70206528.Study on the Ductile Fracture Rule of 6061-T6 Aluminum Alloy Sheet Under Different Strain Conditions:TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS,2019
-
[4] 鲁世红,鲁世红,何泽洲,王亦金,孙东轩,张子尧.国产5083铝合金复杂零件超塑性成形工艺研究:热加工工艺,2018
-
[5] 鲁世红,鲁世红,Yang, Wenkai,Liu, Wenhao.Optimization method to select temperature based on chemorheological and exothermal reaction of RTM:J. Appl. Polym. Sci.,2019
-
[6] 鲁世红,鲁世红,张春,李正芳,毛志翔,向琳彤.整体自阻电加热渐进成形温度控制系统:锻压技术,2019
-
[7] 鲁世红,鲁世红,张春,李正芳,毛志翔,向琳彤.大角度深圆锥件多道次渐进成形工艺的研究:热加工工艺,2018
-
[8] 鲁世红,鲁世红,周圳,F70206528,关艳英,姜伟.Experimental Study of Elastic Prestressed Ultrasonic Peen Forming on Aluminum Alloy:Zhongguo Biaomian Gongcheng/China Surf. Eng.,2017
-
[9] 鲁世红,鲁世红,李正芳,F70206528,张春华,毛志翔.Electric assistance hot incremental sheet forming: an integral heating design:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018
-
[10] 鲁世红,鲁世红,章珈彬,周正东,吴天睿,徐刚.Modeling of multiple shots for analyzing shot peening controlled parameters on formed curvature radi:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017
-
[11] 鲁世红,.Electric assistance hot incremental sheet forming: an integral heating design:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,96(9):3209-3215
-
[12] 鲁世红,鲁世红,李正芳,F70206528,张春华,毛志翔.1060 Al Electric Hot Incremental Sheet Forming Process: Analysis of Dimensional Accuracy and Tempera:TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS,2018
-
[13] 鲁世红,李正芳,鲁世红,鲁世红,李正芳,F70206528,毛志翔,张春华.A Simple and Low-Cost Lubrication Method for Improvement in the Surface Quality of Incremental Sheet:TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS,2018
-
[14] 鲁世红,鲁世红,李正芳,F70206528,毛志翔,张春华.Analysis of geometrical accuracy based on multistage single point incremental forming of a straight :INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017
-
[15] 鲁世红,鲁世红,张炜,吴天睿,周友良,周正东.Research on stability of panel ultrasonic peening forming:Key Eng Mat,2017
-
[16] 鲁世红,章珈彬,鲁世红,章珈彬,刘朝训,吴天睿.Ultrasonic peening forming of perforated plate based on thickening design around hole:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017
-
[17] 鲁世红,鲁世红,章珈彬,吴天睿,周正东,张炜.An evaluation on SP surface property by means of combined FEM-DEM shot dynamics simulation:ADVANCES IN ENGINEERING SOFTWARE,2018
-
[18] 鲁世红,鲁世红,章珈彬,F70206528,徐刚,周正东.An analytical model to study of potential effects on component elongation in shot peening:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018
-
[19] 鲁世红,鲁世红,李正芳,陈鹏.Improvement of dimensional accuracy based on multistage single point incremental forming of a straig:INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2017
-
[20] 鲁世红,鲁世红,刘文浩,王伟.基于可靠性数据的航材备件需求预测方法:航空计算技术,2017
