点击次数：

所属单位：机电学院

发表刊物：INTERMETALLICS

关键字：Metallic glass Wire electrochemical micro machining Mass transport Parameters Microstructure

摘要：The technique of wire electrochemical micro machining (WECMM) is proposed firstly for the micropatterning of Ni-based metallic glass in this paper. Metallic glass (MG) exhibits many outstanding properties such as high hardness and strength, which enable it to be used as functional and structural materials in micro electromechanical systems (MEMS). A significant limitation to the application of MGs is the challenge of shaping them on micro scale. WECMM is a non-traditional machining technique to fabricate microstructures that has some unique advantages over other methods, which will be a promising technique for micro shaping of metallic glass structures. Taking the example of a Ni-based glassy alloy, Ni72Cr19Si7B2, the polarization and fabrication characteristic in dilute hydrochloric acid electrolyte were investigated. Changes in the machined slit width in terms of several experimental parameters were investigated to find the optimal ones. Finally, the optimal machining parameters: HCl electrolyte concentration of 0.1 M, applied voltage of 4.5 V, pulse duration of 80 ns, pulse period of 3 ms and feed rate of 0.3 mu m s(-1) were employed for the fabrication of microstructures. Such as a micro square helix with a slit width of 14.0 mu m, standard deviation of 0.2 mu m and total length up to 2000 mu m, along with a micro pentagram structure with side length of 90 mu m and sharp corner of 36 degrees, were machined with a high level of stability and accuracy. (C) 2017 Elsevier Ltd. All rights reserved.

ISSN号：0966-9795

是否译文：否

发表时间：2017-02-01

合写作者：Meng, Lingchao,曾永彬,朱荻

通讯作者：曾永彬,房晓龙