已经得到个称赞     给我点赞
  • 博士生导师
  • 招生学科专业:
    力学 -- 【招收博士、硕士研究生】 -- 航空学院
    航空宇航科学与技术 -- 【招收硕士研究生】 -- 航空学院
    机械 -- 【招收硕士研究生】 -- 航空学院
  • 电子邮箱:
  • 所在单位:航空学院
  • 学历:法国巴黎第六大学
  • 办公地点:本部流体楼(C12)- 301室
  • 性别:
  • 联系方式:wangjf@nuaa.edu.cn
  • 学位:工学博士学位
  • 职称:教授
  • 毕业院校:南京航空航天大学; Université Pierre et Marie Curie
论文成果
当前位置: 中文主页 >> 科学研究 >> 论文成果
A Simple Zero-Sequence-Voltage-Based Cluster Voltage Balancing Control and the Negative Sequence Current Compensation Region Identification for Star-Connected Cascaded H-Bridge STATCOM
  • 点击次数:
  • 所属单位:航空学院
  • 发表刊物:IEEE TRANSACTIONS ON POWER ELECTRONICS
  • 关键字:Cascaded H-bridge static synchronous compensator (CHB STATCOM) cluster voltage balancing control compensation region of negative sequence currents dc-form representation zero sequence voltage injection
  • 摘要:In some application circumstances, both positive and negative sequence reactive power compensations are desired from the star-connected cascaded H-bridge static synchronous compensator (CHB STATCOM). However, the unbalanced phase currents/voltages will cause uneven active power flow among three clusters, which makes the cluster voltage balance more challenging. In this scenario, only zero sequence voltage is available to balance the cluster voltages. Although the zero sequence voltage can be calculated in all operating conditions based on the equilibrium of the active power for each phase cluster, the calculation is definitely complicated due to the zero sequence voltage expressed in the form of trigonometric function in the abc or dq0 frame. In this paper, the zero sequence voltage is represented in a dc form in the dq frame through introducing a virtually orthogonal zero sequence voltage. As a result, a linear relationship between the active powers and the zero sequence voltage is established, based on which, a simple zero sequence voltage calculation method is proposed with a small calculation burden. Furthermore, the accurate compensation region for the negative sequence current injection is identified by establishing the relationship between the maximum converter voltage and the negative sequence currents taking into consideration the initial phase angle of the negative sequence currents, while still keeping the cluster voltage balanced by using the zero sequence voltage control. The effectiveness of the proposed control and the compensation region are verified by the simulation and experimental results on a 400 V/+/- 7.5 kVAr star-connected CHB STATCOM.
  • ISSN号:0885-8993
  • 是否译文:
  • 发表时间:2018-10-01
  • 合写作者:Lu, Daorong,Zhu, Jianxin,wang,jiangfeng,Yao, Jianhui,wang,sen,胡海兵
  • 通讯作者:王江峰
  • 发表时间:2018-10-01