精密加工过程强化传热；绿色高效冷却技术；高效精密加工技术；増材制造

发表学术论文60余篇，其中中科院TOP期刊30余篇。

近3年发表部分学术论文：

2026年

1.       Ning Qian*, Chengxiang Li, Ziyu Liu, Yuting Sun, Yusuf Kaynak, Lama Anggei, Zhengcai Zhao, Yucan Fu. Dynamic mechanical behavior of K417G superalloy: development of Johnson-Cook constitutive model and its application in single-grit grinding. Materials & Design. 2026, 115576.

2.       Fan Jiang, Ning Qian*, Jiajia Chen, Marco Bernagozzi, Marco Marengo, Yucan Fu. 3D asymmetric loop thermosyphon under radial rotation: A novel method for enhanced heat transfer in grinding. International Journal of Thermal Sciences, 2026, 219: 110219.

3.       Junshuai Zhao, Dan Wen, Biao Zhao, Ning Qian, Wenfeng Ding. Thermal analysis of ultrasonic vibration-assisted gear form grinding: Computational modeling and experimental validation. International Journal of Heat and Mass Transfer. 2026, 255: 127827.

4.       Shuai Wang, Yongchen Xie, Bo Pan, Ning Qian*, Sławomir Pietrowicz, Wenfeng Ding, Yucan Fu. Cooling and Lubrication Performance Analysis in Ultrasonic Vibration-Assisted Grinding by Heat Pipe Grinding Wheel. Lubricants. 2026, 14: 30.

2025年

5.       Ning Qian, Wenfeng Ding, Jiuhua Xu. Challenges and solutions for high-efficiency-sustainable grinding of aero-engine hot-end components. Chinese Journal of Aeronautics. 2025, 103536.

6.       Ning Qian, Fan Jiang, Marco Bernagozzi, Jiajia Chen, Marco Marengo, Yucan Fu, Jiuhua Xu. Nonlinear Dynamic Analysis of Temperature Characteristics in Oscillating Heat Pipes Under Radial Rotations. Chinese Journal of Mechanical Engineering. 2025, 38:112

7.       Ning Qian, Bo Sun, Min Li, Jiali Wang, Lihe Yang, Raj Das, Wenfeng Ding, Jiuhua Xu. Mechanism of cutting damage formation and turning process optimization of 3D needled C/SiC composites. Journal of the European Ceramic Society. 2025, 45(7): 117234.

WOS:  ; IDS:  

8.       钱宁，何静远，苏宏华，孙雨婷，昂给拉玛，丁文锋，徐九华. 面向SiC_f/SiC复合材料精密制孔的单层钎焊金刚石套料钻脉冲激光修整研究.金刚石与磨料磨具工程, 2025, 45(2):143-152.

9.       Fan Jiang, Ning Qian*, Marco Bernagozzi, Marco Marengo, Jiajia Chen, Yucan Fu. Thermal performance and flow characterization of oscillating heat pipe under ultrasonic field. International Communications in Heat and Mass Transfer. 2025, 166: 109150.

10.    Jingjing Shi, Ning Qian*, Shihao Sun, Yusuf Kaynak, Ras Das, Yucan Fu, Honghua Su. Effect of process parameters on microstructure and properties of Inconel-718 superalloy fabricated by wire-arc direct energy deposition technique. Journal of Materials Research and Technology. 2025, 37: 173–185.

11.    Biao Zhao, Junshuai Zhao, Ming Han, Dan Wen, Ning Qian, Wenfeng Ding, Wenfeng Ding, Hailong Cui. On friction and wear performance of ground surfaces of ultra-high-strength steel under ultrasonic vibration-assisted grinding process. International Journal of Advanced Manufacturing Technology. 2025, 137: 2713–2728.

12.    Biao Zhao, Xiaowei Wang, Tao Chen, Wenfeng Ding, Ning Qian, Jiuhua Xu. Simulation and experimental thermal analysis of ultrasonic vibration-assisted high-efficiency deep grinding of γ-TiAl blade tenon. Applied Thermal Engineering. 2025, 258: 124629.

13.    Jiajia Chen, Songyan Liu, Zijie Tong, Guowei Xu, Ning Qian, Yucan Fu, Wenfeng Ding, Chenwei Dai, Qilin Li, Weihua Wei. Boosting waste heat recovery: energy-efficient dropwise condensation via synergistic surface architecture and wettability design on copper. Applied Thermal Engineering, 2025, 281: 128745

14.    Tao Chen, Biao Zhao, Wenfeng Ding, Ning Qian, Jiuhua Xu, Yumin Wang. Brittle-plastic synergistic removal mechanism and grain wear in ultrasonic grinding of anisotropic fiber-reinforced MMCs. Friction, 2025

15.    Shengtao Lin, Zhengcai Zhao, Ning Qian, Yucan Fu. Enhancing machining allowance optimization of near-net-shape blades during manufacturing: an adaptive registration framework using curvature-based segmentation. Machining Science and Technology, 2025

16.    Lei Zhang, Zhengcai Zhao, Shichen Zheng, Ning Qian, Yao Li, Jiuhua Xu, Haixiang Huan. A novel tool wear monitoring approach based on attention mechanism and gated recurrent unit. Machining Science and Technology, 2025, 29(2): 187-211.

17.    Jiajia Chen, Weihuang Ji, Zijie Tong, Songyan Liu, Ning Qian, Yucan Fu, Yan Chen, Chenwei Dai. Thermal performance of profile rotating heat pipe grinding wheel using nanofluids. International Journal of Advanced Manufacturing Technology. 2025, 137(1-2):633-643.

2024年

18.    Ning Qian, Zhengcai Zhao, Yao Li, Yucan Fu, Wenfeng Ding, Jiuhua Xu. Adaptive machining of damaged blades repaired by additive manufacturing: a novel double-constrained method for model reconstruction. Machining Science and Technology. 2024, 28(4): 547-569.

WOS: 001264691900001; IDS: XW4D2

19.    Ning Qian, Muhammad Jamil, Wenfeng Ding, Yucan Fu, Jiuhua Xu. Thermal management in grinding of superalloys – A critical review. Journal of Intelligent Manufacturing and Special Equipment. 2024, 5(1): 3-33.

20.    Ning Qian, Fan Jiang, Marco Marengo, Marco Bernagozzi, Biao Zhao, Yucan Fu, Juihua Xu. Internal flow characteristics of radial rotating oscillating heat pipe filled with acetone or water. International Communications in Heat and Mass Transfer. 2024, 157: 107718.

WOS:001260926100001; IDS: XI0D2

21.    Ning Qian, Jiajia Chen, Aqib Mashood Khan, Biao Zhao, Yurong Chen, Wenfeng Ding, Yucan Fu, Jiuhua Xu. Towards Sustainable Grinding of Difficult-to-Cut Alloys—A Holistic Review and Trends. Chinese Journal of Mechanical Engineering. 2024, 37: 23. https://doi.org/10.1186/s10033-024-01002-y

WOS: 001179207100001; IDS: KI0G1

22.    Ning Qian, Marco Marengo, Fan Jiang, Xi Chen, Yucan Fu, Jiuhua Xu. Pulsating heat pipes filled with acetone and water under radial rotation conditions: Heat transfer performance and semi-empirical correlation. International Communications in Heat and Mass Transfer. 2024, 150: 107172.

WOS: 001132017800001; IDS: DK8D6

23.    Fan Jiang, Ning Qian*, Marco Bernagozzi, Marco Marengo, Biao Zhao, Jingzhou Zhang, Yucan Fu. Thermal performance prediction of radial-rotating oscillating heat pipe by a novel fusion model: A case study of application in grinding. Case Studies in Thermal Engineering. 2024, 60: 104731

24.    Chuanqiang Zhou, Ning Qian*, Honghua Su, Jingyuan He, Wenfeng Ding, Jiuhua Xu. Pulsed Unipolar-Polarisation Plasma Electrolytic Polishing of Ni-Based Superalloys: A Proof of Conception. Chinese Journal of Mechanical Engineering. 2024, 37(1): 105.

WOS:001321911900001; IDS: H2P5Y

25.    Jingjing Shi, Ning Qian*, Shihao Sun, Honghua Su, Wenfeng Ding. Enhancement of material microstructure and properties in Arc wire-based direct energy deposition: A short review. Journal of Advanced Manufacturing Science and Technology. 2024, 4(4): 2024015.

26.    Tao Chen, Hong Xiao, Shandong Feng, Biao Zhao, Wenfeng Ding, Ning Qian, Yumin Wang. Heterogeneous components removal mechanism and grinding force model from energy aspect in ultrasonic grinding continuous fiber reinforced metal matrix composites. Journal of Materials Processing Technology. 2024, 332: 118538.

27.    Qing Miao, Wenfeng Ding, Tao Chen, Biao Zhao, Ning Qian, Chenwei Dai, Zhen Yin. Surface gradient structures in single-crystal nickel alloy induced by ultrasonic-assisted high-speed grinding. Materials Today Communications. 2024, 38: 107930.

28.    Yao Li, Zhengcai Zhao, Kai Wang, Ning Qian, Yucan Fu, Shifeng Cao. Active-passive hybrid feed rate control systems in CNC machining: Mitigating force fluctuation and enhancing tool life. Journal of Manufacturing Processes, 2024, 77: 184-195.

授权中国发明专利20余件，登记软件著作权5件。