点击次数：

所属单位：机电学院

发表刊物：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

关键字：High-speed wire cut Servocontrol system Large energy Surface burning Discharge probability detection Cutting speed

摘要：This study analyzes the limitations of servo control systems for high-speed wire cut electrical discharge machining (HSWEDM). The discharge gap cannot be adjusted in real time during large energy cutting, as this will prevent interelectrode dielectric liquid from entering the discharge gap steadily, leading to violent vaporization and resulting in surface burning of the workpiece. This study proposes a new servo control system for HSWEDM based on discharge probability detection. The system collects the interelectrode discharge signal by dividing and comparing voltage circuits and then calculating discharge probability in a field-programmable gate array (FPGA), after which the machine tool adjusts feed rate by comparing the actual and initial target discharge probability. Thus, proper and stable discharge gap are ensured, enabling the interelectrode dielectric liquid to remain constant, increasing efficiency and stability, and decreasing surface burning effectively. Experiments prove that a servo control method based on discharge probability detection can increase stable cutting speed to 180 mm(2)/min and workpiece surfaces show no apparent burning stripes. In addition, the highest cutting speed can be increased to 208 mm(2)/min.

ISSN号：0268-3768

是否译文：否

发表时间：2017-12-01

合写作者：He, Xiaoxiao,Pan, Hongwei,邱明波,Zhang, Yongjun

通讯作者：刘志东