点击次数：

所属单位：机电学院

发表刊物：INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

关键字：DWS WEDM Hybrid machining Shape cutting Semiconductor

摘要：In this study, the problem of poor precision and low efficiency in shape-cutting hard, brittle semiconductor materials with traditional fixed abrasive diamond wire sawing (DWS) is investigated experimentally and a novel approach, which combines electric discharge and diamond abrasive grinding into a single process, is proposed. Experiments with polycrystalline silicon materials are conducted to contrast abrasive-spark hybrid machining, diamond wire sawing, and wire electrical discharge machining (WEDM). The results show that, under the same processing conditions, the shape accuracy of abrasive-spark hybrid machining is the highest and cylindricity error is as the lowest, at 11 mu m. In comparison with WEDM, the damage-layer thickness of machined surfaces is reduced by 10 mu m. Among three processing methods, hybrid machining has the minimum wire bending and wider kerf. The thickness of damage layer and the surface roughness of hybrid machining are in the middle. The surface topography is composed of shallow discharge pits and grinding areas, and there are few scratches on the cut surface compared to diamond wire-cut surfaces, such that this new machining method is found to be more suitable for shape-cutting hard and brittle semiconductor materials.

ISSN号：0268-3768

是否译文：否

发表时间：2018-02-01

合写作者：周威威,张斌,邱明波,陈浩然,沈理达

通讯作者：刘志东