点击次数：

所属单位：自动化学院

发表刊物：IEEE Trans Ind Electron

摘要：The reverse LLC voltage gain is lower than unity. The dc-link voltage is then lower than the peak grid voltage so that the buck type dc-ac converters cannot be grid-tied directly, which causes the LLC reverse operation difficult in bidirectional application. This paper proposes a silicon carbide (SiC) bidirectional LLC charger architecture to achieve high efficiency and high power density. The first stage is an interleaved bridgeless totem pole power factor correction (PFC) to achieve unity power factor. The second stage is a 300-kHz LLC taking advantage of wide zero voltage switching (ZVS) range and magnetic integration. Thanks to extra control freedom of high dc-link voltage, the dc-dc voltage gain regulation is shared by the dc-ac stage taking advantage of high voltage SiC MOSFETs. A reverse LLC voltage gain compensation control by regulating dc-link voltage is proposed to enable the LLC bidirectional operation. A digital adaptive synchronous rectification driving scheme is proposed based on the LLC primary driver signals, which immunes to the circuit oscillation caused by high dv/dt and parasitic elements. A 6.6 kW SiC bidirectional LLC charger is build. The power density is 3.42 kW/L with 3 kW/kg and increases 55.6% over the reference design. The charging efficiency is above 96% through the battery voltage from 240 to 420 V, and 2% higher than the state-of-the-art products. The peak discharging efficiency under 6.6 kW is 96%, and 1% higher than the state-of-the-art efficiency. © 1982-2012 IEEE.

ISSN号：0278-0046

是否译文：否

发表时间：2020-02-01

合写作者：Li, Haoran,Wang, Shengdong,Tang, Jiacheng,任小永,陈乾宏

通讯作者：张之梁