标题：
Micro-shaping of metallic glass by wire electrochemical micro-machining with a reciprocating traveling workpiece
点击次数：
所属单位：
机电学院
发表刊物：
JOURNAL OF ALLOYS AND COMPOUNDS
关键字：
Metallic glass Polarization characteristic Complex microstructures Reciprocating traveling workpiece Mass transport
摘要：
Metallic glasses exhibit many outstanding properties, such as high hardness and strength, but their micro-shaping is still challenging. The technique of wire electrochemical micro-machining (WECMM) with a reciprocating traveling workpiece is proposed firstly for complex micro-shaping of metallic glasses. WECMM has increasingly become recognized as a versatile technique for producing planar contour micro-features, and holds promise for the micro-shaping of metallic glass structures. In WECMM, the processing performance is significantly affected by the mass transport rate in the narrow inter-electrode gap. Therefore, a new method with a reciprocating traveling workpiece is developed to enhance mass transport. Analysis of the electric field and flow field indicates that the reciprocating motion of the workpiece can facilitate active removal of electrolysis products and rapid refreshment of electrolyte, both of which are beneficial for maintaining a stable current density distribution on the machining surface. Taking a Ni-based metallic glass, Ni72Cr19Si7B2, as an example, the polarization and processing characteristics in dilute acid electrolyte are investigated. An overall improvement in processing performances is achieved. Finally, several complex five-layered microstructures are fabricated successfully using the optimized parameters. The resulting surface roughnesses R-a and R-max are just 0.018 mm and 0.225 mu m, respectively. The total machining efficiency in terms of feed rate reaches 4.0 mu m/s. (C) 2017 Elsevier B.V. All rights reserved.
ISSN号：
0925-8388
是否译文：
否
发表时间：
2018-03-30
合写作者：
Meng, Lingchao,房晓龙,朱荻
通讯作者：
曾永彬
发表时间：
2018-03-30
学位：工学博士学位
职称：教授
所在单位：机电学院