标题：
Multi-objective optimization of energy consumption and surface quality in nanofluid SQCl assisted face milling
点击次数：
所属单位：
机电学院
发表刊物：
Energies
摘要：
Considering the significance of improving the energy efficiency, surface quality and material removal quantity of machining processes, the present study is conducted in the form of an experimental investigation and a multi-objective optimization. The experiments were conducted by face milling AISI 1045 steel on a Computer Numerical Controlled (CNC) milling machine using a carbide cutting tool. The Cu-nano-fluid, dispersed in distilled water, was impinged in small quantity cooling lubrication (SQCL) spray applied to the cutting zone. The data of surface roughness and active cutting energy were measured while the material removal rate was calculated. A multi-objective optimization was performed by the integration of the Taguchi method, Grey Relational Analysis (GRA), and the Non-Dominated Sorting Genetic Algorithm (NSGA-II). The optimum results calculated were a cutting speed of 1200 rev/min, a feed rate of 320 mm/min, a depth of cut of 0.5 mm, and a width of cut of 15 mm. It was also endowed with a 20.7% reduction in energy consumption. Furthermore, the use of SQCL promoted sustainable manufacturing. The novelty of the work is in reducing energy consumption under nano fluid assisted machining while paying adequate attention to material removal quantity and the product’s surface quality. © 2019 by the authors.
是否译文：
否
发表时间：
2019-02-21
合写作者：
Khan, Aqib Mashood,Jamil, Muhammad,Salonitis, Konstantinos,Sarfraz, Shoaib,何宁,Mia, Mozammel,F70206398
通讯作者：
赵威
发表时间：
2019-02-21
学位：工学博士学位
职称：教授
所在单位：机电学院