Release time:2020-03-23  Hits:

• Affiliation of Author(s):机电学院
• Journal:JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
• Key Words:carbon content CrTiAlCN coatings friction coefficient wear
• Abstract:Multi-component CrTiAlCN coatings with different carbon contents were deposited on AISI M2 high-speed steels using unbalanced magnetron sputtering via adjusting the C2H2 flow rates, and their microstructures and mechanical properties were characterized by using SEM, EDS, XRD, Vickers hardness tester and scratch tester, respectively. The tribological properties of CrTiAlCN coatings sliding against SUS440C high carbon martensitic balls were performed using ball-on-disk tribo-tester. The results showed that CrTiAlCN coatings were mainly comprised of (111) and (200) crystal orientation. The maximum hardness of coatings was 29.4 +/- 1.5 GPa as the carbon content was 22.5 at.%. With an increase in the carbon content of coatings, the friction coefficients and wear rates of CrTiAlCN/SUS440C tribo-pairs were significantly reduced, and the wear mechanism of coatings changed from adhesive wear to abrasive wear.
• ISSN No.:1059-9495
• Translation or Not:no
• Co-author:Zhang, Maoda,Frank Chow,Fang, Haotian,Wu, Zhiwei,Wang Qianzhi,kjz
• Correspondence Author:Frank Chow,zhoufeifei
• Date of Publication:2019-03-01