标题：
A novel design method for 3D elliptical vibration-assisted cutting mechanism
点击次数：
所属单位：
机电学院
发表刊物：
Mech Mach Theory
摘要：
The elliptical vibration-assisted cutting (EVC) mechanism is an important unit in the EVC process. However, most of structural designs of EVC mechanism are customized, and these design cannot be applied in other EVC mechanism. This can be contributed to that no general design principle is refined from these actual designs and result in low design efficiency. A novel design method for 3D EVC mechanism is proposed in the paper. First, a simplified motion schematic is designed by considering the layout form of input displacement axis, which can be used to generate 3D motion in space. Then the structural schematic is constructed by considering the relationship between subchain form and the detailed structural form. Based on the designed schematic, the model of EVC mechanism is established and the kinematic model is theoretically analyzed. Finally, FEM is used to analyze and optimize the established EVC mechanism. In order to verify the feasibility of the proposed method, a design case based on the actual requirements is given. The actual 3D EVC device is fabricated and its 3D elliptical loci is verified. The design case indicates that the proposed method for the EVC mechanism is satisfactory and can be applied in other designs. © 2019 Elsevier Ltd
ISSN号：
0094-114X
是否译文：
否
发表时间：
2019-04-01
合写作者：
Song, Yun
通讯作者：
张臣
发表时间：
2019-04-01
学位：工学博士学位
职称：教授
所在单位：机电学院