王彤
    硕士生导师
  • 招生学科专业:
    力学 -- 【招收硕士研究生】 -- 航空学院
    机械工程 -- 【招收硕士研究生】 -- 航空学院
    航空宇航科学与技术 -- 【招收硕士研究生】 -- 航空学院
    机械 -- 【招收硕士研究生】 -- 航空学院
  • 学位:工学博士学位
  • 职称:副教授
  • 所在单位:航空学院
硕士生导师
教师英文名称:Wang Tong
电子邮箱:
所在单位:航空学院
学历:博士研究生毕业
办公地点:A18-618
性别:
联系方式:wt78@nuaa.edu.cn
毕业院校:南京航空航天大学

标题:
Operational Modal Analysis Based on Videogrammetric Technique
点击次数:
所属单位:
航空学院
发表刊物:
J Vib Shock
摘要:
Videogrammetric technique is an easy-to-use, non-intrusive and high-precision measurement method. The vibration process of a tested structure is recorded by using cameras, then the movements of multiple measurement points are tracked by image processing and multi-object tracking techniques. The 3D displacements of each measurement point are extracted by using the camera imaging model and the bundle adjustment methods. In this sense, a measurement point can be taken as a micro three-axis displacement transducer, and the multi-object tracking of measurement points can be considered as synchronized multi-channel data acquisition. Here, the geometric model of the measuring configuration was firstly set up by linking the spatial measurement points under the stationary state of the tested structure. Then the dynamic displacement responses were extracted with the video acquisition and multi-object tracking. Finally the operational modal analysis was performed to identify the modal parameters of the structure. Namely, based on the videogrammetric technique, the geometric modeling of the measuring configuration and signal acquisition were realized. Closely integrated with the modal analysis software, the complete video acquisition and analysis system was formed. It was shown that the system has a good ability to reveal the spatial domain, it is especially, technique and method were suitable for dynamic testing and analysis of flexible lower frequency structures. The proposed successfully applied to tests of a light fan blade and some different leaves, their effectiveness was verified. © 2017, Editorial Office of Journal of Vibration and Shock. All right reserved.
ISSN号:
1000-3835
是否译文:
发表时间:
2017-03-15
合写作者:
Li, Junpo,Xia, Zunping
通讯作者:
王彤
发表时间:
2017-03-15
个人简介

       王彤,男,工学博士,南京航空航天大学航空学院结构工程与力学系振动工程研究所副所长、教学主任。本科毕业于南京航空航天大学飞机设计专业,博士毕业于南京航空航天大学机械设计及理论专业。主要研究领域为航空航天结构动力学、直升机旋翼动力学,长期从事动态测试、信号处理、模态分析、有限元模型修正与确认等方面的理论研究、工程应用、软件开发和系统集成等工作。

       2005年从南京航空航天大学测试仪器与技术博士后流动站出站。2006年受日本文部省21世纪COE计划资助,赴日本东京工艺大学进行学术交流。2013年受国家留学基金委全额资助,赴美访学。先后在国内外期刊上发表SCI、EI学术论文100余篇,获国家发明专利近十项,拥有软件著作权近十项。

       先后主持或参加多项国家自然科学基金、航空科学基金、博士学科点基金的研究工作,在航空航天、高铁、土木、机械等领域承担了大量横向课题。多项研究成果应用于国家重点型号工程,曾获教育部、工信部科技进步奖。重视产、学、研相结合,与企业合作紧密,任职江苏省“双创计划”科技副总。

       自2006年以来指导博士、硕士研究生30余人,广泛就业于航空、航天、船舶、机械、电子、光学等行业。

       以国家需求为导向,服务重大工程,专注工程应用,坚持自主开发。热忱欢迎有志青年加入本课题组!招生专业:航空宇航科学与技术力学机械工程

扫一扫用手机查看