王登勇

个人信息Personal Information

教授 博士生导师

招生学科专业:
机械工程 -- 【招收博士、硕士研究生】 -- 机电学院
机械 -- 【招收博士、硕士研究生】 -- 机电学院

性别:男

毕业院校:南京航空航天大学

学历:南京航空航天大学

学位:工学博士学位

所在单位:机电学院

办公地点:明故宫校区4号楼4309

联系方式:dywang@nuaa.edu.cn

电子邮箱:

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Research on counter-rotating electrochemical machining of convex structures with different heights

点击次数:

所属单位:机电学院

发表刊物:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

关键字:Counter-rotating Electrochemical machining Convex structures Concave cavity

摘要:Counter-rotating electrochemical machining (CRECM) is an alternative method for the manufacture of aero-engine casing parts with complex convex structures. In previous studies, the revolving part with hollow windows was used as the cathode tool. However, only convex structures with the same height could be machined. In practice, there are usually differences in height between different convex structures on the surface of most casing parts. To machine convex structures of different heights by using CRECM, a specific cathode with concave cavities has been designed. The bottom surfaces of concave cavities are conductive, and the depths of concave cavities are changed according to the height of convex structures. The material of the workpiece in this study is Inconel 718. Forming processes of convex structures with the cathode are simulated by using the finite element method. Results show that during the processing, the top surface of the convex structure is gradually changed from stray corrosion at low current density to normal dissolution at high current density. The height of the convex structure increases and then approximately keeps constant with increasing amount of feed, and it also can be controlled by changing the depth of the concave cavity. Finally, convex structures of different heights on the cylindrical workpiece are machined experimentally, verifying the feasibility of the method.

ISSN号:0268-3768

是否译文:

发表时间:2019-10-01

合写作者:He, Bin,朱增伟,Li, Jinzheng,朱荻

通讯作者:王登勇