王登勇

个人信息Personal Information

教授 博士生导师

招生学科专业:
机械工程 -- 【招收博士、硕士研究生】 -- 机电学院
机械 -- 【招收博士、硕士研究生】 -- 机电学院

性别:男

毕业院校:南京航空航天大学

学历:南京航空航天大学

学位:工学博士学位

所在单位:机电学院

办公地点:明故宫校区4号楼4309

联系方式:dywang@nuaa.edu.cn

电子邮箱:

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Analysis of the flow field in counter-rotating electrochemical machining

点击次数:

所属单位:机电学院

发表刊物:J Mater Process Technol

摘要:In electrochemical machining (ECM), the electrolyte flow field has marked influence on the processing stability, efficiency and surface quality. This paper presented a new electrolyte flow mode to improve the flow field distribution in counter-rotating electrochemical machining (CRECM), in which the electrolyte flows into the processing zone from both sides and top of the fixture, and flows out from the bottom of the fixture. The flow field distributions were analyzed and simulated via computational fluid dynamics (CFD) software. The simulation results showed that the low-velocity area in CRECM was eliminated and the velocity distribution was more uniform by using the optimized flow mode. Experiments were also conducted using a specific fixture. The experimental results indicated that a stable machining process with a small inter-electrode gap could be achieved, and the ECM accuracy was remarkably improved. The sidewall taper angles and rounded corners of the machined convex structure were reduced to be only about -0.8° and 0.6 mm. © 2019 Elsevier B.V.

ISSN号:0924-0136

是否译文:

发表时间:2020-01-01

合写作者:Li, Jinzheng,朱荻,He, Bin

通讯作者:王登勇