沈理达Lida Shen

教授

教授 博士生导师 硕士生导师

电子邮箱:

所在单位:机电学院

职务:教授

学历:南京航空航天大学

办公地点:明故宫校区4号楼

主要任职:南京航空航天大学增材制造研究所执行所长

其他任职:南航无锡研究院增材制造研究所所长、江苏省数字化医疗装备技术重点实验室副主任

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Preparation of Ni-SiC composite coatings by magnetic field-enhanced jet electrodeposition

发布时间:2018-11-13 点击次数:

所属单位:机电学院
发表刊物:JOURNAL OF ALLOYS AND COMPOUNDS
关键字:Magnetic field Jet electrodeposition Adhesion Corrosion resistance
摘要:To improve the effective working life of sintered NdFeB magnets, Ni-SiC composite coatings were prepared on NdFeB by magnetic field-enhanced jet electrodeposition. It was found that the influence of the magnetic field on the ions in the electrolyte improved the edged effect that is most likely to occur in traditional jet electrodeposition, accelerated the mass transfer of ions, and improved the coating morphology, as compared with Ni-SiC prepared by traditional jet electrodeposition. The microstructure and nanoparticle content of the coatings was characterized by field emission scanning electron microscopy (FESEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). The coating microhardness, adhesion and corrosion resistance were tested by a microhardness instrument, scratch tester and electrochemical workstation, respectively. The results show that the magnetic field enhanced jet electrodeposition caused a decrease in defects in the Ni-SiC coating surface and an increase in the flatness. When the nano-SiC particle concentration was 3 g/L, the nano-SiC content in the coating increased to 3.27%, which is higher than the 2.13% of traditional jet electrodeposition. Also, the adhesion between the coating and the NdFeB was obviously improved and there was no gap, and the corrosion resistance was also further improved. (C) 2018 Elsevier B.V. All rights reserved.
ISSN号:0925-8388
是否译文:
发表时间:2018-09-25
合写作者:江伟,邱明波,王鑫,范明智,田宗军
第一作者:沈理达
通讯作者:沈理达