Effect of inverse load on critical heat flux of steam-water two-phase flow in a tube
点击次数:
所属单位:航空学院
发表刊物:Beijing Hangkong Hangtian Daxue Xuebao
摘要:An experimental investigation using a rotating platform was performed to obtain the critical heat transfer performance of steam-water two-phase flow in a rectangle tube under inverse load. By changing the parameters such as magnitude of inverse load, inlet subcooling and mass flow rate, the critical flow and heat transfer data of steam-water two-phase flow boiling under static and inverse load were obtained. The results show that mass flow rate decreases with continuous heating, but the variation of fluid pressure difference in the test section is opposite. At critical state, mass flow rate decreases with increasing inverse load and/or inlet subcooling. Fluid pressure difference increases with increasing inverse load and mass flow rate, and decreases with increasing inlet subcooling. The critical heat flux increases with increasing inverse load, mass flow rate and inlet subcooling. Inverse load greatly impacts critical heat flux. Within its changing range from 0 g to 2.5 g, the critical heat flux could be increased by 50%. © 2017, Editorial Board of JBUAA. All right reserved.
ISSN号:1001-5965
是否译文:否
发表时间:2017-04-01
合写作者:Song, Junhui,张钊,李冈
通讯作者:Song, Junhui,宋保银