• 其他栏目

    邱明波

    • 副教授 硕士生导师
    • 招生学科专业:
      机械工程 -- 【招收硕士研究生】 -- 机电学院
      航空宇航科学与技术 -- 【招收硕士研究生】 -- 机电学院
      机械 -- 【招收硕士研究生】 -- 机电学院
    • 性别:男
    • 毕业院校:南京航空航天大学
    • 学历:南京航空航天大学
    • 学位:工学博士学位
    • 所在单位:机电学院
    • 办公地点:明故宫4317
    • 联系方式:13913945652
    • 电子邮箱:

    访问量:

    开通时间:..

    最后更新时间:..

    Technology of ablation milling by fast-moving electrode

    点击次数:

    所属单位:机电学院

    发表刊物:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

    关键字:Electrical discharge machining Electrode suspension Fast moving Ablation milling

    摘要:To improve the efficiency of conventional electrical discharge machining (EDM) milling, this study proposes a highly efficient machining method that employs continuous oxygen feeding and fast-moving electrode. High-efficiency machining is achieved by the method of feeding with small thickness, allowing the electrode suspended above the workpiece to reduce short circuit and using a high discharge probability to ignite the workpiece in order to realizing high efficiency machining with great chemical energy released from metal combustion. Comparative tests for conventional EDM milling, EDM ablation milling, and ablation milling by fast-moving electrode were performed in the milling process. In this study, we analyzed the mechanism, machining efficiency, electrode relative wear ratio, and machining quality. The machining efficiency of EDM ablation milling was 6.8 times higher than that of conventional EDM milling, and the relative tool wear ratio was 20% of conventional EDM milling; the machining efficiency of ablation milling by fast-moving electrode can reach 11.2 times higher than that of conventional EDM milling, and the electrode relative wear ratio decreased by 86%.

    ISSN号:0268-3768

    是否译文:

    发表时间:2018-04-01

    合写作者:Yang, Donglei,Han, Yunxiao,Kong, Linglei,Zhou, Weiwei,刘志东

    通讯作者:邱明波