点击次数：
所属单位：航空学院
发表刊物：FIRE TECHNOLOGY
关键字：Inerting Deoxygenation Fire Fuel Fuel scrubbing Nitrogen Carbon dioxide
摘要：Fuel scrubbing technology could be used for fuel tank inerting and fuel deoxygenation. Both N-2 and CO2 are perfect inert gases, but the solubility of CO2 is nearly 20 times higher than that of N-2 in jet fuels, so the scrubbing inerting process varies with the selection of N-2 or CO2. A scrubbing test bench is constructed, and the variation of oxygen concentration on ullage or in the fuel is measured under various flow rates, fuel loads and initial oxygen concentrations on ullage. Experimental results reveal that the ullage and dissolved oxygen concentrations of CO2 scrubbing are always higher than that of N-2 scrubbing. The inerting time of CO2 scrubbing of a 30%, 50% and 70% fuel load is approximately 1.42, 1.7 and 2.75 times that of N-2 scrubbing, respectively. The scrubbing test under 5%, 9% and 14% initial ullage oxygen concentration revels a peak in ullage oxygen concentration of 7.23% and 9.97% for N-2 scrubbing and that of 12.63%, 13.4% and 15.4% for CO2 scrubbing, respectively.
ISSN号：0015-2684
是否译文：否
发表时间：2018-03-01
合写作者：Shao, Lei,Li, Chaoyue,冯诗愚,Sun, Bing,Pan, Jun
通讯作者：刘卫华