Title of Paper:Improvement of dimensional accuracy based on multistage single point incremental forming of a straight wall cylinder part

Hits:

Affiliation of Author(s):机电学院

Journal:INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING

Key Words:Single point incremental forming Multistage forming Straight wall cylinder Dimensional accuracy

Abstract:Multistage forming is usually adopted to form those parts with steep angle or straight wall during single point incremental forming. In order to study multistage single point incremental forming further, based on an experiment method and a mathematic analysis method, straight wall cylinders are fabricated with different materials and different heights to investigate dimensional accuracy of specimens obtained. Three kinds of materials including 1060 aluminum, Q235 steel and DC04 steel are selected to deform specimens with four-stage single point incremental forming. The mathematic model of dimensional error is proposed to predict the sinking defect according to the law of energy conservation. In addition to this, the strain strength coefficient (K) and the axial feed rate (v (1)) are studied in detail for the largest deviation of specimens. Experiment results demonstrate that the mathematic model is feasible and an optimal v (1) obtained effectively improves the dimensional accuracy of specimens.

ISSN No.:2234-7593

Translation or Not:no

Date of Publication:2017-09-01

Co-author:李正芳,陈鹏

Correspondence Author:Shihong lu