点击次数：

所属单位：材料科学与技术学院

发表刊物：Mater. Res. Express

摘要：This paper aims to offer a novel friction stir welding (FSW) for improving the joint integrity. It uses the upper sheet and grooved backing plate to avoid thickness reduction and root flaws. The effect of process parameters on the microstructure and mechanical properties was investigated by Taguchi method. The results showed that thickness reduction and root flaws in the joints could be completely eliminated. The morphologies of stir zone (SZ) were able to be divided into typical stacked layers and onion ring structures. Besides, all the SZ contained fine equiaxed grains and its grain size increased as the ω/v ratio increased. The signal to noise (S/N) ratio showed the optimum parameters were rotational speed of 1000 rpm, welding speed of 65 mm min-1 and tilt angle of 2.5°, which reached the largest tensile strength of 238 MPa, approximately 84.1% of base metal (BM). The fracture morphology of the joint contained plenty of dimples, exhibiting typical ductile fracture. © 2019 IOP Publishing Ltd.

是否译文：否

发表时间：2019-05-17

合写作者：Guo, Chao,,Yan, Yinfei,Hou, Wentao,Huang, Guoqiang,沈以赴

通讯作者：Guo, Chao,郭朝蕾