Title of Paper:Influence of graphite addition on bonding properties of abrasive layer of metal-bonded CBN wheel

Hits:

Affiliation of Author(s):机电学院

Journal:INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Key Words:Graphite Bonding properties Abrasive layer Metal-bonded CBN wheel Grinding

Abstract:In order to improve the performance of metal-bonded grinding wheels, the graphite particles with several different contents (i.e., 5, 10, 15, and 20 wt%) were added to Cu-Sn-Ti alloy powders as the bonding materials. The influence of graphite addition on bonding properties of the abrasive layer was investigated. Firstly, microstructural examination results show that the joining between graphite and Cu-Sn-Ti alloy was achieved and provided a weak bonding strength compared to the pure Cu-Sn-Ti matrix. Secondly, the transgranular fracture and intergranular fracture were determined as the main fracture patterns of abrasive layer in the current investigation. Then, an optimized graphite content of 10 wt% was decided, at which the porosity of abrasive layer can reach 25% as well as the bending strength reached 125 MPa and was favorable to meet the high-speed grinding requirements. Finally, the finite element simulation results suggested that the graphite addition had little effect on the residual thermal stresses of abrasive layer.

ISSN No.:0268-3768

Translation or Not:no

Date of Publication:2017-11-01

Co-author:Miao, Qing,Fu, Dengkui,Chen, Zhenzhen,fyc

Correspondence Author:dwf